Electrolux Washing Machine Error Codes
Browse all 20 diagnostic codes for Electrolux Washing Machine. Click any code for detailed DIY repair guides.
Water Inlet Difficulty
Machine is not filling with water properly.
Drainage Problem
Water is not draining away.
Anti-Flood Protection
Water detected in the bottom of the machine.
Door Open
Door is not closed or interlock failed.
Motor Fault
General motor system error.
Heating Error
Water is not heating up.
NTC Sensor Fault
Temperature sensor reading invalid.
Selector Knob Error
Cycle selector giving wrong signal.
Configuration Error
Main board software configuration mismatch.
Power Supply Issue
Voltage or frequency unstable.
Water Fill Timeout
Not filling fast enough during wash.
Pump Blocked
Drainage failed specifically due to pump.
Pressure Switch
Pressure sensor circuit fault.
Pressure Sensor Calibration
Pressure sensor reading unstable.
Water Overflow
Water level too high.
Pressure Chamber Clog
No pressure change detected during drum rotation.
Door Open Warning
Door sensed as open.
Tachogenerator Fault
No signal from motor generator.
UI Communication
User Interface lost connection to Main Board.
Control Locked
Child safety lock on.