Samsung Washing Machine Error Codes
Water Supply Issue
The washer is not getting enough water to start the cycle.
Water Drainage Problem
The washer cannot drain water effectively.
Unbalanced Load Error
The laundry is clumped together causing balance issues.
Door improperly closed
The washer door is not fully closed or locked.
Water Level Sensor Fault
The washer cannot detect the correct water level.
Too Many Suds Detected
Excessive foam prevents normal operation.
Hot Cold Hose Reversal
Hot and cold water hoses are connected to wrong inlets.
Temperature Sensor Error
The washer detects an issue with water temperature.
Stuck Button on Panel
A button on the control panel is acting as if pressed.
Motor Drive Error
The motor is not spinning correctly.
Water Overflow Detected
There is too much water in the machine.
Water Heating Error
The water is not heating up as expected.
Communication Signal Error
Internal parts are not communicating properly.
Voltage Power Issue
The power supplied to the washer is unstable.
Child Lock Active
Buttons are locked to prevent accidental use.
Downloading Software Update
The machine is updating its software.
Detergent Drawer Open
The detergent dispenser is not fully closed.
Water Leak Detected
Water is leaking from the machine.
Vibration Sensor Error
The washer cannot detect vibration levels accurately.
Clutch Position Error
The clutch mechanism is not in correct position.