KitchenAid Washing Machine Error Codes
Browse all 23 diagnostic codes for KitchenAid Washing Machine. Click any code for detailed DIY repair guides.
Primary Control Failure
The central control unit (CCU) has failed.
Long Drain
Drain time exceeded 8 minutes.
Water Temperature Sensor
Water temperature sensor data is invalid.
Drive Motor Tachometer
Control board unable to detect motor speed.
Motor Control Unit
Motor Control Unit (MCU) error.
Overflow Condition
Water level in drum is too high.
Serial Communication Error
Communication loss between CCU and MCU.
Dispenser Error
Dispenser motor cannot complete movement.
Water Inlet Problem
No water flow detected.
Drain Fault
Washer is not draining properly.
Door Lock Error
Door not locking.
Heater Failure
Heater element open circuit.
Water Temp Error
Water temperature not rising.
Door Switch Error
Door switch open during cycle.
Serial Communication Error
Communication failure with UI board.
Pump Internal Failure
Drain pump connection lost.
Drum Rotation Friction
Drum is hard to turn.
Suds Lock
Too much detergent foam.
Remove Load
Drum overload detected.
Door Lock Fault
Door lock mechanism failed.
EEPROM Memory Error
Stored settings corrupted on main board.
MCU Not Responding
Motor Control Unit is not communicating.
Long Drain
Drain cycle exceeding time limit.