Whirlpool Washing Machine Error Codes
Primary Control Failure
The main control board has failed to detect a signal.
Long Drain
The washer is taking too long to drain water.
Water Temperature Sensor Error
The water temperature sensor (thermistor) is reading out of range.
Drive Motor Tachometer Error
The control board cannot detect motor speed.
Motor Control Unit Error
Communication failure between Main Control and Motor Control Unit (MCU).
Overflow Condition
Water level is too high in the drum.
Serial Communication Error
Communication error between the main control board and motor control unit.
Dispenser Circuit Error
Issue with the dispenser motor or linkage.
Water Inlet Issue
No water detected entering the machine.
Long Drain Time
Washer is not draining fast enough.
Door Lock Error
Door is not locked effectively.
Heater Failure
Washer heater element is not working (if equipped).
Water Temperature Error
Water temperature is not increasing.
Door Switch Error
Door switch is not closing properly.
Serial Communication Error
Bad communication between Central Control Unit and User Interface.
Pump Drive System Error
Connection to drain pump is lost.
Drum Rotation Error
Drum is not rotating smoothly during wash.
Door Lock Error
Door cannot lock.
Door Unlock Error
Door cannot unlock after cycle.
Suds Lock
Excessive suds preventing spin.